Please measure even 0.1mm by using caliper or send us your butt.

And also we notice you that we don't do ring grafting so that we recommend you to order partial shaft and ask reparing shop to ring grafting around you.

We please to accept to prosecce the copy ring for order shaft.

Cobra Shaft <COBRA>

The Cobra Shaft is a pure wood shaft that has better deflection and get stronger twist than normal shaft, by putting curbon in the hollow at the tips made by 5A maple.

We can also remodel your normal shaft to same as Cobra shaft tip. Send it over to our shop and cost would be 13,000JPY with 640JPY for carriage, The delivery should be taken for 2 weeks. (You can't change to Cobra taper on yours)

Cobra shaft top

The secret of Cobra shaft is in the structure of the tip. Decrease the rigidity on the tip by making about 10cm long hollow from the top.

So that you concentrate the power and get easier twisting. As a result of these you get stable cue ball control, less deflection to object ball, easier to affect twist to cue ball and while poketing the object balls you still feel comfortable to contorol cue ball.

Ferrule : Titan, Tip : MORAVIA R, Tip Sheet : G10, Tapar : COBRA Tapar

Cobra 8 Shaft <COBRA 8>

Cobra 8 Shaft has enormous equalized hardness shaft and decrease warping.

The seacret is the material of this shaft. It is 8 pieces adhesive structure made by cutting 45 degree triangular shape along with straight grain of Canadian Hardrock Maple.

The secret of Cobra shaft is in the structure of the tip. Decrease the rigidity on the tip by making about 10cm long hollow from the top.

So that you concentrate the power and get easier twisting. As a result of these you get stable cue ball control, less deflection to object ball, easier to affect twist to cue ball and while poketing the object balls you still feel comfortable to contorol cue ball.

Ferrule : Titan, Tip : MORAVIA R, Tip Sheet : G10, Tapar : COBRA Tapar

Cobra 8 Break Shaft <COBRA 8 BK>

Using phenolic rasin of special shape in the tip and titan ferrule, Cobra 8 Break Shaft will bring you a strong break shot without swinging cue ball.

Ferrule : Titan, Tip : Canvas Phenolic, Tapar : COBRA Tapar

The size of above those Cobra Shaft are full length 29inch, the diameter of the joint is 21.4mm

To produce copy ring separately asks for the charge.

The price is different according to your favor. Please ask us to check the price.

As standard price range from 50USD to 150USD.

If the ivory and precious metals are contained, it becomes a quotation.

キング・コブラ・エイトシャフト<KING COBRA 8>

We use the special shaft material that is Maple layered structure with 0.6mm
thick 168 sheets of Canadian hard rock maple plywood per inch. And the
hardness became more uniform, decreased warping. It suit for people who
likes to use harder shaft.

To decrease the solidity make a hollow more than 10cm long from ferrule,
when you make twisting the cue will dodge to prevent loose cue ball
direction, you can shot with very low deflection, you can easier to control
your cue ball twist, pocketing the object balls while you get easier controlling cue ball.

The greatest High-Tech Shaft in the series.

Ferrule : Titan, Tip : MORAVIA R, Tip Sheet : G10, Tapar : COBRA Tapar

Change to Cobra Shaft ferrule, 50USD not. It doesn't contain the carriage.

We proud to introduce you some of our customer's voice.

Thank you for the King Cobra lately.

As I thought the feeling of butting was quite hard.

Almost no deflection, better feeling than 314.

A bit former balance compare to 314 and it makes me feeling better.

Aoyagi, Tokyo

My shaft is Mezz D1 shaft.

The slapping sound of Cobra 8 BK semral to Predator and a bit lower tone than D1 make,

I can feel more focus on cue ball.

The length of time for object balls rolling are coming longer.

This is almost same as Predator BK2.

Ozaki, Fukui

I have never used special shaft before, but this time I have so impressed to experiencd that such a effectively twisting uesed by Cobra Shaft.

Kobayashi, Fukui